The ENOZE 8500–8503 series packs fully proportional throttle and steering into a palm-size 1/43-scale chassis. Choose from eight model-and-color combinations, then select the standard setup or the gyro-equipped version for added directional assistance on smooth indoor surfaces.
Working headlights, taillights and underbody lighting give each car a lively display after dark. The included 2.4GHz controller, rechargeable drive battery, USB charging cable and four cone-style barriers make this a convenient small-space driving set.
Specifications
Scale: 1/43
Drive: 4WD
Control: fully proportional throttle and steering
Radio system: 2.4GHz
Gyro: included only with variants labeled With Gyro
Supplier-rated maximum speed: up to 15km/h under suitable conditions
Supplier-rated control range: approximately 30m in an open, interference-free area
Car battery: 3.7V 150mAh rechargeable battery
Supplier-rated charging time: approximately 20 minutes
Supplier-rated runtime: up to 20 minutes; actual results vary with driving style, surface and battery condition
Lighting: headlights, taillights and underglow
Car dimensions: approximately 11 × 4.9 × 2.9cm
Package dimensions: approximately 21.5 × 16 × 8cm
Package contents
1 × selected ENOZE RC drift car
1 × 2.4GHz controller
1 × 3.7V 150mAh rechargeable car battery
1 × USB charging cable
4 × cone-style drift barriers
Required separately: 2 × AA batteries for the controller.
Use notes
Operate on a clean, dry and smooth surface. The gyro assists heading control but does not drive the car automatically. Allow the battery and electronics to cool before charging, supervise charging on a nonflammable surface, and avoid water or immersion. Body styling is identified by ENOZE model numbers only; no third-party vehicle licensing is claimed.
